Coach Larry D in Los Angeles called about a material list for the PVC goal posts. This is for one goal post so double this for a set of two:
- 40ft of 3" PVC DWV pipe
- 2 -3" Santees
- 2-3" fernco couplings
- 2- 3x1-1/2" fernco couplings
- 20ft of 1-1/2' PVC DWY pipe
Measurements
- 3" uprights - 9ft 8.5 inches long
- glue the 3 inch santee or fitting on top of this piece
- then cut a 3" x 3ft piece to glue in the top of the santee
- place the 3x1-1/2 rubber fernco coupling on top of this piece
- cut a 10ft piece of 1-1/2 pipe to slide down inside the 3" pipe.
- cut a 6 inch piece of 3" pipe and glue into the side of the fitting
- connect one of the 3" rubber fernco coupling here.
- cross bar is approx 16ft 10 inches long and is attached to the rubber couplings on each 3" upright.
- pound two 6ft steel fence posts into the ground
- stand the goal posts up and set infront of the steel posts
- use two or three long bungee cords to fasten the PVC pipe to the fence posts. Wrap high and low. Bungee cords with plastic hooks.
- wrap with padding to protect players from injury.
- call me if you have any questions 435-817-6555
- find a plumber to help you
- he will know where to get a santee and fernco couplings
No comments:
Post a Comment